3 New Snappi Baby Cloth Diaper Fastener No Pins Start Price USD 6.99 Current Price USD 6.99 Time Left - Bid Count 0 Buy It Now Price - Reserve Price - Start Time Tuesday, May 13, 2008 End Time Tuesday, May 20, 2008 Location Alpine, Utah See more about '3 New Snappi Baby Cloth Diaper Fastener No Pins' Description 3 New Snappi Baby Cloth Diaper Fastener No Pins   I have the following colors:   Mint Green, Yellow and Pastel Blue. You get 3 snappi's The Snappi® Diaper Fastener revolutionized cloth diapering! Over 40 million have sold worldwide. It is an EASY to use fastener that offers a practical and reliable way to fasten a cloth diaper, replacing the diaper pin. It comes in a variety of colors and is made from a stretchable non-toxic material, which is T-shaped with grips on each end. These grips hook into the diaper fabric to ensure a snug-fitting diaper with enough natural movement for the baby. WARNING:1. ALWAYS use a cover when using a Snappi® fastener on your baby’s diaper.2. Keep out of children’s reach when not in use!3. Do not use your Snappi® for longer than 6 months.4. Do not leave your Snappi® lying in the sun as it is not UV resistant and can reduce the effectiveness of the Snappi®.CARE: Clean your Snappi® in hot soapy water. Do not launder them with diapers in the washer as this may weaken the grip attachment.CAUTION: Any tear in the Snappi® can lead to separation of a piece, presenting a possible choking hazard. Do not cut your Snappi® as this could create weak spots in your Snappi®. Inspect your Snappi® before each use and discontinue use immediately if there is any sign of cracking, tearing, breakage or wear of the teeth or any other parts. DIRECTIONS FOR USE:Snappi® fasteners need to be used correctly in order to work effectively.1. STRETCH the Snappi® fastener before its first use. The stretching triggers the 'memory' of the Snappi® to return to its original size and in so doing, pulls the diaper together to the middle to allow for a snug fit. This is essential for the Snappi® to work properly. This can be done by holding the Snappi® in the center with one hand and close to the end of the leg with the other hand. Then s-t-r-e-t-c-h a few times (10 or so). As you do this you should feel how the material 'softens' or gets more elastic. Follow this stretching procedure with each leg. The Snappi® is now ready to go! 2. Make sure that the Snappi® is ATTACHED SECURELY. It is important that the Snappi® 'leg' being attached be stretched across the diaper before hooking it into the diaper. So,Hook Left, Stretch ACROSS and Hook Right, Stretch DOWN and Hook Center In other words, the Snappi® fastener should go from a ‘T’ shape to a ‘Y’ shape. By following these instructions, the Snappi® should be secure, the diaper will fit snugly and the baby should not be able to undo it. ALWAYS place a cover over the diaper and Snappi® fastener. The Snappi® fastener is manufactured from FDA approved raw materials, a polyester based polyurethane which is degradable on aging through hydrolysis and/or microbiological attack. It contains NO latex or any other adulterant, dilutent or modifying polymers. The composition is 100% polyurethane. It is made in South Africa. Click here to save more!   I combine Shipping! Check out my ebay store items! Questions?  Contact me at sjohnson@alpinebabydepot.com Visit our website   http://www.alpinebabydepot.com Place a Bid!